A-2496 S SPUNBONDED NONWOVEN 1600 mm

PRODUCT WIDTH: 1600 mm
FILAMENT DENIER: ≤2.5 DENIER
OUTPUT: ABOUT 1500 TON
WEIGHT RANGE: 10 TO 150 GSM
MAXIMUM DIAMETER OF FABRIC PER ROLL: 800 mm

 

Description

SPECIFICATIONS:
PP CHIPS REQUIREMENTS
• MFI: 25 TO 45 G / 10 min, ±1% PER BLOCK
• MELT POINT: 166 ℃
• ASH: <0.15 TO 0.25 %
• PP COLOR MASTER BATCH AND ADDITIVES
PRODUCT WIDTH: 1600 mm
FILAMENT DENIER: ≤2.5 DENIER
OUTPUT: ABOUT 1500 TON
WEIGHT RANGE: 10 TO 150 GSM
MAXIMUM DIAMETER OF FABRIC PER ROLL: 800 mm
DESIGN SPEED: 10 TO 150 M/min
RUNNING SPEED: 10 TO 130 M/min
SIZE OF MACHINE: 9000 mm * 17000 mm x 10500 mm
SUGGESTED WORKPLACE AREA: 50000 X 25000 mm (INCLUDING MATERIAL AND FINAL PRODUCT WAREHOUSE)
HEIGHT OF WORKPLACE: FORE – SPINNING 12000 mm, BACK SPINNING 5500 mm

THE MAIN STRUCTURE OF THE EQUIPMENT:
MEASURING AND MIXING DEVICE
USAGE: TO MIX PP, AND ADDITIVES AS COLOR MASTER BATCH, ANTIOXIDANT, FIRE RETARDANT WITH CERTAIN RATIO
MAIN TECHNICAL PARAMETER:
• MAXIMUM FEEDING ABILITY: 320 KG / H
• SURGE BIN CAPACITY: 1.5 M3
• MAXIMUM ADDITIVE HOPPER: 3
FACILITIES AND SPECIFICATION
• SURGE BIN 1 SET
• MEASURING AND MIXING DEVICE 1 SET
• IT IS MADE UP OF 1 MAIN HOPPER, 2 ACCESSORY HOPPERS, VACUUM FEEDER, METAL DETECTOR AND SO ON
• SET UP HIGH LEVEL AND LOW-LEVEL ALARM DEVICE, AUTO CONTROL FEEDING DEVICE. ELECTRICAL MOTOR OF SCREW IN MIXING DEVICE IS FREQUENCY CONVERTING
RIM CHARGE AUXILIARY SCREW AND RECYCLING UNIT
USAGE: RECYCLE THE RIM
RECYCLING SCREW USE THE ALTERNATING FREQUENCY CONVERTER
• SCREW DIAMETER: Φ 105
• SCREW HEATING ZONE NUMBER: 4 ZONES
130 MODEL SCREW EXTRUDER
USAGE: TO SQUEEZE AND MELT PP, AND ADDITIVES AS COLOR MASTER BATCH, ANTIOXIDANT, FIRE RETARDANT
MAIN TECHNICAL PARAMETER:
• SCREW SIZE: Φ 130, MAXIMUM EXTRUSION OUTPUT: 320 KG / H
• SCREW ROLLING SPEED: 60 R/min
• SCREW HEATING ZONE NUMBER: 8 ZONES
• AC MOTOR
FACILITIES AND SPECIFICATION
• THE DEVICE CONTAINS FEED INLET, AUTO HEATING AND COOLING SYSTEM AND OVERPRESSURE ALARM SYSTEM
SCREW SPINNING MACHINE – THE PP MELT GOES THROUGH FILTER, MELT PIPE, AND METERING PUMP TRANSPORT THE FUSANT INTO SPINNING CONTAINER AND FIBER COMES OUT FROM SPINNERET.

SPECIFICATIONS:
OUTPUT: ABOUT: 1500 T / YEAR
• FIBER DENIER: ≤2.5 DENIER
• WEIGHT RANGE: 10 TO 150 G /M2
SWITCHED MELT FILTER
• FILTER RATINGS: 250 SECTION
• FILTER AREA: 2.5 SQUARE METER
METERING PUMP AND TRANSMISSION UNIT
• PUMP OFFERING QUANTITY: 200 CC
SPINNING CONTAINER
• HEATING PATTERN: OIL HEATING
MELT PIPE
• HEATING PATTERN: OIL HEATING
MONOMER SUCTION DEVICE
• AIR PRESSURE: 1300 PA
• FLUX: 844 M3 / H
SPINNING COMPONENT
• HOLE DIAMETER: 0.42 mm
• L/D: 1:4
• MATERIAL: SUS431

STRETCHING DEVICE
USAGE: STRETCHING AND COOLING THE FIBER
MAIN TECHNICAL PARAMETER: WORKING WIDTH: 1600 mm DEVICE COMPONENTS
• THE DEVICE CONTAINS QUENCHING CHAMBER, UP STRETCHING CHANNEL, DOWN STRETCHING CHANNEL, DIFFUSE WINDER TUNNEL ETC. USING DOUBLE – SIDE SYMMETRY WIND TO COOL FIBER
• STRETCHING SLIT IN DOWN STRETCHING DEVICE CAN ADJUST ACCORDING TO CRAFT REQUIREMENTS. ADJUST SYSTEM TAKES TORQUE MOTOR DRIVE

WEB FORMING MACHINE
USAGE: OFFER CARRIER FOR FIBER AFTER STRETCHING
MAIN TECHNICAL PARAMETER:
• AIR SUCTION QUANTITY: 28000 M3 / H
• DESIGN SPEED: 10 TO 150 M/min
• NORMAL RUNNING SPEED: 10 – 120 M/min
• WEB – LAYING APRON: VENTING QUALITY: 7000 TO 8000 M3 / H.M3
DEVICE COMPONENTS
• WEB – LAYING APRON TRANSMISSION DEVICE
• AIR SUCTION CHANNEL
• SEALING DEVICE
• POSITION CORRECTING SET
• TENSION DEVICE
• RACK DEVICE
• PRE-ROLLER
CALENDER
MAIN PARAMETER
• SPEED: 10 TO 150 M/min
• WORKING WIDTH: 1600 mm
• ROLLER TYPE: UP ROLLER IS EMBOSSING ROLLER, DOWN ROLLER IS MIRROR ROLLER
LAP WINDER
MAIN PARAMETER
• SPEED: 10 TO 150 M/min
• WORKING WIDTH: 1600 mm
• PAPER TUBE DIAMETER: Φ76 mm
• MAXIMUM WINDING DIAMETER:1200 mm
SLITTER
• SPEED: 10 TO 250 M/min
• WORKING WIDTH: 1600 mm
• MINIMUM DIVIDING WIDTH:100 mm
• MAXIMUM FABRIC DIAMETER: Φ800 mm