Description
TWO-PIECE HOODED DESIGN:
WITH TWO-PIECE HOODED THREE-DIMENSIONAL CUT AND ELASTIC BAND AROUND THE FACE OPENING, THE HOOD CAN BETTER FIT THE SHAPE OF FACE AND ENHANCE THE PROTECTION EFFECT.
SEAM SEALED TAPE WORKMANSHIP:
EACH SEAM IS SEALED WITH TAPE, AND THE WAIST IS APPLIED WITH AN INTERNAL ELASTIC BAND, WHICH BETTER ENHANCE THE SEAM PROTECTION AND THE FITNESS OF THE SUIT.
ELASTIC CUFF:
THE CUFF USES AN INTERNAL ELASTIC BAND TO FURTHER ENHANCE TIGHTNESS AND PROTECTION.
CLOSED PLACKET DESIGN:
CENTER FRONT ZIPPER APPLICATION ALLOWS EASY PUT-ON AND TAKE-OFF, WHILE THE ZIPPER PLACKET DESIGN BRINGS BETTER PROTECTION
TECHNOLOGICAL DETAILS:
(1) NEEDLE STITCHING, BONDING, AND HEAT-SEALING PROCESSES ARE APPLIED TO THE CONNECTION PART OF THE PROTECTIVE SUIT. THE HOLES OF THE STITCHES ARE SEALED. THE STITCH PITCH SHOULD BE 8 TO 14 STITCHES PER 3CM. THE STITCHES ARE ALIGNED AND PROPERLY SPACED. THERE SHOULDN’ T BE SKIPPED STITCH. BONDED OR HOT-SEALED PARTS SHALL BE FLAT AND SEALED WITHOUT AIR BUBBLES.
(2) THE ZIPPER OF THE PROTECTIVE CLOTHING SHOULD NOT BE EXPOSED, AND THE ZIPPER PULLER SHOULD BE SELF-LOCKING.
(3) THE STRUCTURE OF PROTECTIVE SUIT SHOULD BE IN CONFORMITY, EASY TO PUT ON AND TAKE OFF, AND THE JOINTS MUST BE TIGHT.
(4) ELASTIC CUFFS AND ANKLES, AND ELASTIC HOOD AND WAIST OPENINGS.
(5) THE PROTECTIVE SUIT IS IN OVERALL STRUCTURE, WHICH CONSISTS OF A HOODED TOP AND PANTS.
SPECIFICATIONS:
UNIT: CM
| SIZE | HEIGHT | BUST | SLEEVE LENGTH | CUFF | HEM |
| 160 | 165 | 120 | 84 | 18 | 24 |
| 165 | 169 | 125 | 86 | 18 | 24 |
| 170 | 173 | 130 | 90 | 18 | 24 |
| 175 | 178 | 135 | 93 | 18 | 24 |
| 180 | 181 | 140 | 96 | 18 | 24 |
| 185 | 188 | 145 | 99 | 18 | 24 |
| 190 | 194 | 150 | 102 | 18 | 24 |
| DEVIATION | ±2 | ±2 | ±2 | ±2 | ±2 |
STRICT PRODUCTION HYGIENE CONTROL:
1. TAKE OFF SHOES AND ENTER DRESSING AREA
2. PRIMARY DRESSING
3. WEAR PROTECTIVE SUIT
4. WASHING AND DISINFECTION
5. GO THROUGH THE ISOLATOR
6. ARRIVE AT PRODUCTION AREA
DISINFECTION TECHNOLOGY: STERILIZATION WITH ETHYLENE OXIDE
WE USE ETHYLENE OXIDE FOR 10-HOUR STERILIZATION OF THE PROTECTIVE CLOTHING. AT PRESENT, ETHYLENE OXIDE IS WIDELY USED IN STERILIZING MEDICAL DEVICES.
1. ETHYLENE OXIDE CAN KILL ALL MICROORGANISMS, INCLUDING SPORES, BACTERIA, VIRUSES, ETC.
2. THE STERILIZED ARTICLES CAN BE WRAPPED AND PACKAGED AS A WHOLE TO KEEP THEM STERILE BEFORE USE.
3. ETHYLENE OXIDE DOES NOT CORRODE PLASTICS, METALS OR RUBBER, AND DOES NOT CAUSE ITEMS TO TURN YELLOW AND BRITTLE.
4. ETHYLENE OXIDE CAN STERILIZE ITEMS WITH IRREGULAR SHAPES AND COMPLEX STRUCTURES.
WEARING PROTECTIVE SUIT:
1. DISINFECT YOUR HANDS BEFORE WEARING.
2. SELECT THE APPROPRIATE SIZE.
3. WEAR PANTS FIRST AND THEN THE TOP, PUT ON SAFETY SHOES OR SHOE COVERS, PUT ON THE HOOD AND ZIP UP, VELCRO UP CENTER FRONT PLACKET AND PUT ON PROTECTIVE GLOVES.
REMOVING PROTECTIVE SUIT:
1. PLEASE REMOVE IT IN THE SAFE ZONE. FIRST REMOVE PROTECTIVE GLOVES, DISINFECT HANDS, AND THEN WEAR GLOVES.
2. REMOVE OTHER PROTECTIVE ARTICLES, UNZIP THE ZIPPER, LIFT THE HAT UPWARD TO SEPARATE THE HAT FROM THE HEAD, TAKE OFF SLEEVES, JACKETS, LOWER CLOTHES AND PROTECTIVE SHOES, TAKE OFF THE EDGES AND ROLL THEM FROM TOP TO BOTTOM, TAKE OFF POLLUTANTS DIRECTLY TOWARD THE INSIDE, AND PUT THEM INTO THE DESIGNATED CONTAINER TOGETHER WITH SHOE COVERS OR SAFETY SHOES AFTER TAKING OFF.
