Description
SPECIFICATIONS:
PP CHIPS REQUIREMENTS
• MELT INDEX: 35 TO 45 G / 10 min, ±1% PER BLOCK
• MELT POINT: 166 ℃
• ASH: ＜0.15 TO 0.25 %
• PP COLOR MASTER BATCH AND ADDITIVE
PRODUCTS WIDTH: 2400 mm
MELT FILAMENT DENIER: ≤2.3 DENIER
OUTPUT: ABOUT 4200 TON
WEIGHT RANGE: 10 TO 120 GSM
MAXIMUM DIAMETER OF FABRIC PER ROLL: 1200 mm
DESIGN SPEED: <=280 M/min
RUNNING SPEED: <=250 M/min
SIZE OF MACHINE: 17000 X 30000 X 10500 mm (INCLUDING AIR BLOWER)
SUGGESTED WORKPLACE AREA: 50000 X 25000 mm (INCLUDING MATERIAL AND FINAL PRODUCT WAREHOUSE)
HEIGHT OF WORKPLACE: FORE – SPINNING 12000 mm, BACK SPINNING 5500 mm
THE MAIN STRUCTURE OF THE EQUIPMENT:
MEASURING AND MIXING DEVICE
USAGE: TO MIX PP, AND ADDITIVES AS COLOR MASTER BATCH, ANTIOXIDANT, ANTI-PILLING, FIRE RETARDANT WITH CERTAIN RATIO
MAIN TECHNICAL PARAMETER
• MAXIMUM FEEDING ABILITY: 500 KG / H
• SURGE BIN CAPACITY: 2 X 1.5 M3
• MAXIMUM ADDITIVE HOPPER: 3
FACILITIES AND SPECIFICATION
• SURGE BIN 2 SET
• MEASURING AND MIXING DEVICE 2 SET
• IT IS MADE UP OF 1 MAIN HOPPER ,2 ACCESSORY HOPPERS, VACUUM FEEDER, METAL DETECTOR AND SO ON
• SET UP HIGH LEVEL AND LOW LEVEL ALARM DEVICE, AUTO CONTROL FEEDING DEVICE. ELECTRICAL MOTOR OF SCREW IN MIXING DEVICE IS FREQUENCY CONVERTING
RIM CHARGE AUXILIARY SCREW AND RECYCLING UNIT
USAGE: RECYCLE THE RIM
RECYCLING SCREW USE THE ALTERNATING FREQUENCY CONVERTER
• SCREW DIAMETER: Φ 105
• SCREW HEATING ZONE NUMBER: 4 ZONES
150 MODEL SCREW EXTRUDER
USAGE: TO SQUEEZE AND MELT PP, AND ADDITIVES AS COLOR MASTER BATCH, ANTIOXIDANT, FIRE RETARDANT
MAIN TECHNICAL PARAMETER
• SCREW SIZE: Φ 150 X 2, MAXIMUM FEEDING ABILITY: 480 KG / H × 2
• SPEED: 60 R/min
• HEATING ZONE: 7 ZONES
• AC MOTOR
FACILITIES AND SPECIFICATION
• THE DEVICE CONTAINS FEED INLET, AUTO HEATING AND COOLING SYSTEM AND OVERPRESSURE ALARM SYSTEM
SCREW SPINNING MACHINE
USAGE: THE PP FUSANT GO THROUGH FILTER, FUSANT PIPE, AND METERING PUMP TRANSPORT THE FUSANT INTO SPINNING CONTAINER AND FIBER COMES OUT FROM SPINNERET
SPECIFICATIONS:
OUTPUT: ABOUT: 4200 T / YEAR
• FIBER DENIER: ≤2.3 DENIER
• WEIGHT RANGE: 10 TO 120 G /M2
SWITCHED MELT FILTER
• FILTER RATINGS: 250
• FILTER AREA: 3.5 SQUARE METER
METERING PUMP AND TRANSMISSION UNIT
• PUMP OFFERING QUANTITY: 250 CC × 2
SPINNING CONTAINER
• HEATING PATTERN: OIL HEATING
FUSANT PIPE
• HEATING PATTERN: OIL HEATING
SLOT SUCTION DEVICE
• TOTAL WIND PRESSURE: 1300 PA
• FLOW: 844 M3 / H
SPINNING COMPONENT
• HOLE DIAMETER: 0.42 mm
• L/D: 1:4
• MATERIAL: SUS431
STRETCHING DEVICE
USAGE: STRETCHING AND COOLING THE FIBER
MAIN TECHNICAL PARAMETER: WORKING WIDTH: 1600 mm DEVICE COMPONENTS
• THE DEVICE CONTAINS QUENCHING CHAMBER, UP STRETCHING CHANNEL, DOWN STRETCHING CHANNEL, DIFFUSE WINDER TUNNEL ETC. USING DOUBLE – SIDE SYMMETRY WIND TO COOL FIBER
• STRETCHING SLIT IN DOWN STRETCHING DEVICE CAN ADJUST ACCORDING TO CRAFT REQUIREMENTS. ADJUST SYSTEM TAKES TORQUE MOTOR DRIVE
WEB FORMING MACHINE
USAGE: OFFER CARRIER FOR FIBER AFTER STRETCHING.
MAIN TECHNICAL PARAMETER:
• AIR SUCTION QUANTITY: 28000 M3 / H
• DESIGN SPEED: 10 TO 150 M/min
• NORMAL RUNNING SPEED: 10 TO 120 M/min
• WEB – LAYING APRON: VENTING QUALITY: 7000 TO 10000 M3 / H.M2
DEVICE COMPONENTS
• WEB – LAYING APRON TRANSMISSION DEVICE
• AIR SUCTION CHANNEL
• SEALING DEVICE
• POSITION CORRECTING SET
• TENSION DEVICE
• RACK DEVICE
• PRE-ROLLER
CALENDER
MAIN PARAMETER
• SPEED: 10 TO 150 M/min
• WORKING WIDTH: 1600 mm
• ROLLER TYPE: UP ROLLER IS EMBOSSING ROLLER, DOWN ROLLER IS MIRROR ROLLER
LAP WINDER
MAIN PARAMETER
• SPEED: 10 TO 150 M/min
• WORKING WIDTH: 1600 mm
• PAPER TUBE DIAMETER: Φ76 mm
• MAXIMUM WINDING DIAMETER:1200 mm
SLITTER
• SPEED: 10 TO 250 M/min
• WORKING WIDTH: 1600 mm
• MINIMUM DIVIDING WIDTH:100 mm
