Description
FEATURES:
ULTRAVIOLET C DISINFECTION TECHNOLOGY HAS BEEN WIDELY RECOGNIZED IN THE WORLD FOR ITS DISINFECTION EFFECT ON BACTERIA, VIRUSES AND OTHER PATHOGENIC BODIES. THE STERILIZATION EFFECT OF ULTRAVIOLET RAY TO BACTERIUM, VIRUS IS IN A SECOND COMMONLY. FOR TRADITIONAL CHLORINE AND OZONE METHODS, IT USUALLY TAKES 20 TO 50 MINUTES TO ACHIEVE THE STERILIZATION EFFECT OF ULTRAVIOLET LIGHT. IT HAS HIGH EFFICIENCY STERILIZATION BROAD SPECTRUM, NO SECONDARY POLLUTION, SAFE AND REASONABLE DESIGN, SAFE AND RELIABLE OPERATION. SIMPLE OPERATION AND MAINTENANCE, LOW COST. THE EQUIPMENT OCCUPIES A SMALL AREA AND HAS NO NOISE. CONTINUOUS MASS STERILIZATION. THE APPLICATION FIELD IS WIDE AND SO ON A LOT OF ADVANTAGES.
ULTRAVIOLET (UV) LIGHT HAS STRONG POWER TO THE BACTERIA, ALSO HAS CERTAIN HARM TO HUMAN BODY, THE MOST VULNERABLE PARTS OF THE BODY IS THE EYE OF THE CORNEA, SO AT ANYTIME, NOT WITH THE EYES LOOK LIGHT UP THE LAMP, IN ORDER TO AVOID INJURY, ONE THOUSAND MUST SEE, APPLICATION OF COMMON GLASS (GLASSES) OR TRANSPARENT PLASTIC FILM, AS A PROTECTIVE MASK. NEVER USE QUARTZ GLASS BY MISTAKE, BECAUSE ORDINARY GLASS IS ALMOST COMPLETELY IMPERMEABLE TO ULTRAVIOLET LIGHT. ONCE INJURED, DO NOT PANIC, FACIAL BURNS, A FEW DAYS AFTER THE SKIN OFF, AND HEAL. IT TAKES ABOUT THREE OR FOUR DAYS FOR THE EYE TO HEAL. IN ANY CASE, IS IT STILL ADVISABLE TO SEEK MEDICAL ADVICE IMMEDIATELY IN CASE OF INJURY.
MAINTENANCE OF ULTRAVIOLET STERILIZER:
CHECK REGULARLY TO ENSURE THE NORMAL OPERATION OF UV LAMP.
AFTER CONTINUOUS USE OF 9000 HOURS OR ONE YEAR, REPLACE THE ULTRAVIOLET LAMP TUBE. WHEN REPLACING NEW LAMP TUBE, UNPLUG LAMP TUBE POWER SOCKET FIRST, TAKE OUT ULTRAVIOLET RAY LAMP TUBE. PAY ATTENTION TO DO NOT TOUCH THE QUARTZ GLASS OF NEW LAMP TUBE WITH FINGER, BECAUSE BLEMISH CAN AFFECT LAMPLIGHT IS STRONG AND WEAK, PUT LAMP TUBE INTO STERILIZING MACHINE INSIDE CAVITY CAREFULLY AT THE SAMETIME.
SPECIFICATION:
TOTAL LENGTH OF THE EQUIPMENT: 6000 mm
UV WORKING AREA: 5000 mm
FEEDING AREA: 500 mm
DISCHARGING AREA: 500 mm
HEIGHT OF ENTRANCE AND EXIT: mm (ADJUSTABLE)
WIDTH OF ENTRANCE AND EXIT: 1000 mm
CONVEYOR BELT FROM THE GROUND: 750 ± 50 mm
THE MAIN STRUCTURE OF THE EQUIPMENT:
OUTER BODY OF WORKING AREA TUNNEL: 1.2 mm STAINLESS STEEL PLATE
WORKING AREA TUNNEL CAVITY: 1.2 mm HIGH-QUALITY STAINLESS STEEL PLATES ET
BODY SUPPORT FRAME: ONE SET OF SQUARE STEEL
CONVEYOR BELT: ADVANCED TEFLON MESHBELT
CONVEYING DRUM: CLEAN AND FRICTION-RESISTANT DRUM
CONVEYING POWER: ACCORDING TO PRODUCTION NEEDS, THE CONVEYING SPEED IS ADJUSTABLE FROM 0 TO 20 M/MIN
ELECTRICAL EQUIPMENT:
MESH BELT IN ORGANIC SPEED RANGE: 0 TO 5 M/MIN ADJUSTABLE
TRANSPORT MOTOR: 250W
GOVERNOR: STEP LESS SPEED REGULATION
AMMETER: SET OF 20 A
OPERATING VOLTAGE: 220V/60Hz
UV STERILIZATION PART:
STERILIZATION LAMP LENGTH: 550 TO 1000 mm, USING 40 SETS OF 150W UV STERILIZATION LAMP. EVENLY DISTRIBUTED IN THE UPPER AND LOWER LEFT AND RIGHT SIDES OF THE DEVICE IN THE FURNACE CHAMBER, GREATLY IMPROVING THE UTILIZATION RATE OF ULTRAVIOLET LIGHT UP TO 95% (STERILIZATION TIMEISABOUT1MINUTE)
THE INLET AND OUTLET OF THE STERILIZATION AREA IS PROVIDED WITH A LIGHT-PROOF AREA, EQUIPPED WITH A HOOD AND AN ADJUSTABLE BAFFLE.
THE SHELL IS MADE OF STAINLESS STEEL, AND THE WHOLE MACHINE IS CORROSION-RESISTANT AND EASYTO CLEAN
THE BOTTOM IS EQUIPPED WITH FOUR BRAKE TYPE MOVABLE CASTERS FOR EASY MOVEMENT.
TRANSMISSION PART: THE SPEED IS ADJUSTED BY 250W STEPLESS SPEED REGULATING MOTOR, WITH DIGITAL DISPLAY STEP LESS SPEED REGULATING AND LINEAR SPEED METER. THE SPEED IS UNIFORM AND ADJUSTABLE FROM 0 TO 5 M/MIN
INCORPORATE ADVANCED TEFLON NET BELT NET BELT DRIVE, THE MIDDLE IS EQUIPPED WITH A TOWING PLATE. THE FRONT AND REAR ARE EQUIPPED WITH ADJUSTABLE ACTIVE AND PASSIVE ROLLER, WHICH IS CONDUCIVE TO THE NET BELT IS NOT EASY TO RUN SIDES CRAPING ITS BELT
EQUIPPED WITH AUTOMATIC TIMER, YOU CAN MONITOR THE USE TIME OF THE LAMP AT ANY TIME TO FACILITATE THE REPLACEMENT OF THE LAMP. IF THE PRODUCT CAN DROP SLAG, YOU CAN USE A TRAY ON THE CONVEYOR BELT STERILIZATION
PROTECTION DEVICE:
OVER VOLTAGE OVER CURRENT PROTECTION
FAULT ALARM PROMPT
DEVICE OVERLOAD PROTECTION
